Fulton Armory: M14Parts

Fulton Armory M14/M1A® Parts,
Accessories, Tools and Books

Fulton ARmory M14 Competition Grade Rifle


Parts	Accessories and Tools	Books, Posters & DVDs	How to Order
Click Here	Click Here	Click Here	Click Here

Fulton Armory Enhanced M14 SOCOM Systems

SOCOM System Installation FREE
with Stock and Complete Technical Inspection purchases!

AS SEEN in the FEB 2008 ISSUE of
SPECIAL WEAPONS for MILITARY and POLICE!

Fulton Armory Enhanced M14 SOCOM Systems

"...In keeping with the custom nature of the MCS, we contacted Fulton Armory to determine if they had any interest in producing a Modular Combat Rifle incorporating the Troy MCS. The result is the Fulton Armory/Troy Industries Modular Combat Rifle (MCR). Clint McKee, owner of Fulton Armory, is a very though minded individual whose standards for his products are incredibly high and uncompromising. When we made our proposal, Clint stated that he would reserve judgment until he saw Troy's MCS. Clint refuses to use anything but original GI or MILSPEC components in Fulton Armory M14s, M1 Garands, or M1 Carbines and while Fulton Armory rifles cost more than others, theirs are as close as possible to an original military rifle, so when we shipped the Troy MCS to Clint, we were a little apprehensive and weren't prepared for his overwhelmingly positive reaction. Within a week, we had our Fulton Armory/Troy Industries Modular Combat Rifle and if it isn't the ultimate M14, we don't know what is!

"...Shooting is the acid test, and the Fulton Armory/Troy MCR lives up to its claims. Felt recoil was notably less than we are used to on a standard configuration M14/M1As. The MCS stock minimizes muzzle rise and felt recoil while enhancing control and capability for quick follow up shots. The two stage trigger is match quality and as we are fond of saying about really good triggers, breaks like the proverbial "glass rod" without creep or backlash at precisely 4.5 pounds. The Fulton Armory/Troy MCR functioned flawlessly, with shells ejected almost straight out from the receiver at a downward angle.

"...Fulton Armory and Troy Industries have truly redefined the concept of a modular M14 for military, law enforcement tactical teams or anyone who wishes to own what is probably the ultimate all-around M14/M1A rifle for defense or just fun shooting. The Fulton Armory/Troy Industries Modular Combat Rifle has everything a tactical M14 user could ask - superb quality, accuracy, flexibility, ballistics and for law enforcement, tactical utility."

Fulton Armory Enhanced M14 SOCOM Systems

—Fully Integrated: Ready for Any Optic, Any Sling, Any Bipod,
no costly Scope Mounts or Rails to Buy!

True Drop-In 21st Century Chassis for your M14, M1A or other M14-type rifle.
Fulton Armory has applied its 20-plus years of M14 Excellence to the Troy MCS Stock System to bring you the true state-of-the-art in M14-type rifles!

The SOCOM System is easily user-installed; if you can field-strip your M14 or M1A, you can install the Fulton Armory SOCOM System! Or, let us do a Complete Technical Inspection and we'll install your SOCOM chassis for a nominal charge. See the M14/M1A Services Page.

Accepts Any Diameter M14 Barrel!
Use Your Existing Op Rod Guide!
Use Any AR-15 Buttstock Assembly, Any AR-15 Pistol Grip!

Enhanced Accuracy! Accessory Flexibility! AR-15 Ergonomics!
Integrated Scope Mount will Mount Any Optic!
Save up to $200 or more—no costly additional scope mount required!

Outward M4/M16 appearance - Not easily identified as high priority target
Butt Stock in-line with muzzle - Significant reduction of felt recoil and muzzle rise
Full length top rail - Easily and properly mounts any optics, including ACOGs
Rails all around - Great for lights, lasers, even bipods
Accepts any M4/M16 butt stock and pistol grip - Limitess choices from A1 furniture to the Magpul PRS and more
Field strips via standard M4/M16 rear pushpin - No tools needed for field strip

Utilizes standard M14 op rod guide - No need for proprietary components
49" of top, bottom side rails - Accepts all M1913 rail accessories including M203
Proprietary mechanical bedding adjustments - Eliminates the need for fiberglass bedding
User Installable with no special tools - Can be completed in 10 minutes
Aluminum Chassis with proprietary features - Significantly enhances accuracy
Troy proprietary designed system - accepts all diameters of M-14 barrels with no mods

Complete Fulton Armory M14 SOCOM Systems Include:

Close Quarter Battle (CQB) Complete Stock System
—Includes Command Arms CBST Collapsible Stock & Magpul MIAD Grip in Black or Tan
SemiAuto Sniper System (SASS) Complete Stock System
—Includes Magpul PRS Stock & MIAD Pistol Grip in Black or Tan
Universal Battle Rifle (UBR) Complete Stock System
—Includes Magpul UBR Stock & MIAD Pistol Grip in Black or Tan

—or Stock System Chassis Only
(just add your own AR-15 buffer tube, end plate, buffer tube nut, and pistol grip)

Available in BLACK or
FLAT DARK EARTH

Share or Install Any STANAG 1913 Swan/Weaver (Picatinny) Rail Accessory
to the Top, Side and/or Bottom Stock Chassis Rails!

SOCOM System Installation FREE
with Stock and Complete Technical Inspection purchases!

Size: 6 inches by 9 inches
Number of pages: 250
Number of photographs: over 600

The M14 Complete Assembly Guide

-The key to support and maintenance
of your M14/M1A® Rifle-

by Walt Kuleck and Clint McKee

Since the publication of Scott Duff and John Miller's The M14 Owner's Guide and Match Conditioning Instruction, readers have asked for a book that would help guide them through the maintenance, enhancement, disassembly and assembly of their M14/M1A® rifle. Ideally, such a book would impart the tips, tricks, pitfalls and "gotchas!" that experienced M14/M1A® rifle enthusiasts and armorers have discovered and developed over the years.

This is that book. It goes far beyond the military manuals in depth and scope, using words and over 600 pictures to clearly guide you through every operation required to support your M14/M1A®. You'll learn the best and easiest ways to enhance, disassemble and assemble your rifle. It won't make you an M14/M1A® armorer, but it will make you a knowledgeable owner. You'll be able to do more with (and to) your rifle. You'll also be able to better judge the competence of those you choose to work on your rifle, and to discuss your needs more intelligently with them.

In short, you'll know your M14/M1A® inside and out.

Also included are instructions for installing National Match rear sights, a tutorial on tuning your trigger to National Match standards, a discussion of John Garand's contributions to the M14, and several 21st Century enhancements.

The M14 Complete Assembly Guide is a companion volume to The M14 Owner's Guide and Match Conditioning Instructions by Scott Duff and John Miller. The Owner's Guide gives you a look into the history and development of the M14/M1A®, as well as giving you everything you need to know to use and maintain your M14/M1A® Rifle and perform match conditioning work. The Owner's Guide goes far beyond the military manuals in both scope and depth. It's a "must have" for every M14/M1A® owner!

24.95

REPLACEMENT PARTS:
Barrel, Fulton Armory Standard Weight, GI Contour, 1x12 Twist, NM Quality —for Chrome Bore, add 55.00	Fulton Armory Standard Weight 22" Service Rifle Barrel 274.95 QTY: Add for Chrome Bore 55.00 QTY:
Barrel, Fulton Armory Standard Weight, 1x12 Twist, 18.5" "Bush Barrel", NM Quality —for Chrome Bore, add 55.00	Fulton Armory Standard Weight 18" Bush Barrel 274.95 QTY: Add for Chrome Bore —$55 QTY:
Barrel, Fulton Armory NM Stainless Steel 1x10 Twist Medium Weight,	Fulton Armory NM SS Barrel 274.95 QTY: Add for Target Gray —35.00 QTY:
Bolt w/Roller, Fulton Armory Precision Forged and Machined	199.95 QTY:
Bolt w/Roller, Fulton Armory Precision Forged and Machined —Complete Assembly	299.95 QTY:
Bolt Roller w/Clip	19.95 QTY:
Bolt Stop, Forged, New	24.95 QTY:
Bolt Stop, Extended, Smith Enterprise	69.95 QTY:
Bolt Stop Pin	1.00 QTY:
Bolt Stop Spring	1.95 QTY:
*(Buttstock, Buttstock Screws and Sling Swivel, Not Included)* Butt Plate, Rubber Recoil Pad	19.95 QTY:
Butt Plate Assembly, Like New Condition	74.95 QTY:
Butt Plate Screw, Upper, for Wood Stocks	2.95 QTY:
Stock Butt Plate Screw Assembly, Upper, for Fiberglass Stocks	14.95 QTY:
Butt Plate Screw, Lower	2.95 QTY:
Butt Swivel	5.95 QTY:
Cartridge Clip Guide, Forged, Milled	24.95 QTY:
Cartridge Clip Guide Scope Mount Base —Aligns with Sage Stock Forend Rail	59.95 QTY:
Cartridge Clip Guide Pin	1.00 QTY:
Compensator, Smith, CA-Mandatory, replaces Flash Suppressor Choice of Classic Style with Front Sight Base (no lug), or Direct Connect Style (no Front Sight Base) —for applications where front sight is mounted on the gas cylinder lock (e.g, Mk 14), or no front sight is needed (e.g., SOMPOD Systems)	CA-Mandatory Compensator w/o Bayo Lug 149.95 QTY: CA-Mandatory Compensator, Smith Direct Connect 99.95 QTY:
Connector Lock	5.95 QTY:
Connector Lock Pin	1.00 QTY:
Ejector with Spring	8.95 QTY:
Extractor	OUT OF STOCK
Extractor Spring with Plunger	5.95 QTY:
Firing Pin	34.95 QTY:
Flash Suppressor, NM, Fulton Armory Specify with bayonet lug or without bayonet lug, or muzzle brake (without bayonet lug) for CA *With Bayonet Lug shown; barrel, lock nut, locking nut set screw, front sight and front sight screw not included!*	w/Bayonet Lug 69.95 QTY: w/o Bayonet Lug 69.95 QTY: CA-Mandated Compensator w/o Bayo Lug 149.95 QTY:
Vortex® Flash Suppressor, Choice of Direct Connect —for rifles with Gas-Cylinder-Lock-Mounted Front Sights, or Classic Design, with Front Sight Base Not for S, Inc. "SOCOM" models with integral gas cylinder lock/muzzle device.	Vortex® Direct Connect 99.95 QTY: Vortex Classic 149.95 QTY:
NEW! M14 Flash Suppressor Alignment Gauge! Made to USGI print by USGI contractor! The same gauge we use to confirm the alignment of the flash suppressor on your rifle!	69.95 QTY:
M14 Flash Suppressor Pliers!	24.95 QTY:
Flash Suppressor Lock Nut, New G.I.	8.95 QTY:
Flash Suppressor Lock Nut Set Screw	2.95 QTY:
Front Band	14.95 QTY:
Front Sight, Forged, Milled (See below for screw, not included)	19.95 QTY:
Front Sight, NM, Forged, Milled, Not Cast Repro (See below for screw, not included)	29.95 QTY:
Front Sight Screw	1.00 QTY:
Front Sight Night Sight Guys 'n Gals, this is really, really cool! Compatible with all our flash suppressors and compensators, even the Vortex® Direct Connect (Vortexjj DC requires Gas Cylinder Lock w/Dovetail)	.580" for 22" barrel 62.95 QTY: .675" for 18" barrel 62.95 QTY:
Front Sight, Folding, for Rail	79.95 QTY:
Folding Front Sight, Troy Industries, Black or Flat Dark Earth —for any of the Fulton Armory SOCOM Stock Systems!	Black 119.95 QTY: Flat Dark Earth 119.95 QTY:
Front Stock Swivel --with steel cap screw assembly	14.95 QTY:
Front Stock Swivel, NM, Fulton Armory --with steel cap screw assembly	22.95 QTY:
Stock Front Swivel, with Rail, for M14 or M1A Stocks Replaces standard-issue front sling swivel on M14 or M1A^® stock. Provides 3 1/4" long MIL-STD-1913 rail for attachment of accessories. Freely-roatating 1 5/8" sling loop. Milled channel allows residual gas to bleed off from gas vent hole. Use with ARMS QD Bipod Adaptor for Rail (Recommended), or Aluminum or Synthetic Bolt-On Adaptor for Rail.	59.95 QTY:
Gas Cylinder, New, Stripped	129.95 QTY:
Gas Cylinder, NM, w/Welded Front Band	199.95 QTY:
Gas Cylinder Lock, Milled, New	19.95 QTY:
Gas Cylinder Lock, Milled, H&K Style with Circular Sight Protector	99.95 QTY:
Gas Cylinder Lock with Dovetail for Front Sight Sight NOT Included Specify 18" if using standard M14 military height front sight Specify 22" if using higher, non-standard M14 front sight post	18" 99.95 QTY: 22" 99.95 QTY:
Gas Cylinder Lock w/Dovetail with Tritium Front Night Sight and Front Sight Screw (Unassembled) for 18" or 22" Barrel	159.95 for barrel length: QTY:
Gas Cylinder Plug	14.95 QTY:
Gas Cylinder Plug System, Adjusable	47.95 QTY:
Gas Cylinder Shim Set, Stainless	9.95 QTY:
Gas Piston, New	29.95 QTY:
Gas Piston, NM, Polished, New	39.95 QTY:
Gas Piston, NM, Titanium Nitride Coated, Sadlak Industries The Sadlak Industries precision Titanium Nitride (TiN) coated pistons are made to the exact GI specifications with all critical dimensions individually inspected. The 420 stainless material and heat-treating operations are both certified to assure quality. The Sadlak pistons have a highly polished surfaced using a non-contact electro-polishing method that maintains tolerance on the critical diameter and does not “round–over” the edges on the grooves. The Sadlak pistons are then hard coated with a gold colored Titanium Nitride (TiN) finish. This coating, often used on machine cutting tools, helps reduce galling and pitting and holds up better to the high heat and abrasiveness of gunpowder and primers. The resulting effect is a smoother action an improved life of the piston and cylinder.	39.95 QTY:
Hammer	39.95 QTY:
Hammer Pin	2.95 QTY:
Hammer Spring	2.95 QTY:
Hammer Spring Housing, Milled	8.95 QTY:
Hammer Spring Plunger	5.95 QTY:
Handguard, Rail, Fulton Armory Super Scout —The Foundation of the Fulton Armory M14 Super Scout Rifle! Now you can get the fastest target acquisition possible on this proven battle rifle by using a modern sight system. Use the iron sights or mount an Aimpoint^®, pistol or scout scope, ACOG, Holo-sight, red dot, etc. This rugged aluminum and stainless steel unit bolts on in minutes with NO modifications required. Will fit all standard weight US made mil-spec barrels and Springfield, Inc. MIA SOCOM and SOCOM II barrels. The optional Fulton Armory Super Scout Accessory Rail allows quick and secure mounting of lighting devices or laser sights, including the 45⁰ offset so popular with three-gun shooters for their CQB optics. *The Super Scout* Handguard Rail affords much greater heat dissipation compared to those shorty "scout mounts" you may have seen. Nor more "cooked" scopes! Accessory/Light Rail for Super Scout Handguard**	Super Scout Rail Handguard 299.95 QTY: Accessory/Light Mount for Super Scout Handguard 19.95 QTY:
Handguard, New Walnut, Unfinished	39.95 QTY:
Handguard, Solid Glass-Filled Polymer, New, Brown, a Fulton Armory Exclusive! —with or without Handguard Clip Click HERE for why this handguard is the best!! Stripped, no clip Clint, I just wanted you to know that the handguard you make for the M1A/M14 is AWESOME to say the least. Just like the rifle it fits, it's as tough as nails. Thank you so much for making this product. Eddie	14.95 QTY: With Handguard Clip 20.90 QTY:
Handguard, Solid Glass-Filled Polymer, New, Black, a Fulton Armory Exclusive! —with or without Handguard Clip Click HERE for why this handguard is the best!! Stripped, no clip Clint, I just wanted you to know that the handguard you make for the M1A/M14 is AWESOME to say the least. Just like the rifle it fits, it's as tough as nails. Thank you so much for making this product. Eddie	14.95 QTY: With Handguard Clip 20.90 QTY:
Handguard Retaining Clip	5.95 QTY:
Magazine Catch, Milled, USGI	16.95 QTY:
Magazine Release, Tactical, M14, Sadlak The Sadlak Tactical Magazine Release Latch is manufactured to original USGI specification with the exception of the thumb pad, which has been enlarged and serrated to provide a faster, smoother release, and a more positive grip. The vertical serrated grooves in the tab are machined in the direction the thumb travels allowing a firm grip that results in quick magazine changes what are helpful during the rapid portion of competition matches and other tactical operations. The ergonomic design of the rounded edges assures comfortable use. *Comes with Installation Instructions, a tapered alignment pin, and a replacement Pivot Pin.*	39.95 QTY:
Magazine Catch Pin	1.00 QTY:
Magazine Catch Spring	2.95 QTY:
Operating Rod Guide, Milled	14.95 QTY:
Operating Rod Guide Pin	1.00 QTY:
Operating Rod Spring, USGI, each or in 10-Pack	Each 6.95 QTY: 10-Pack 50.00 QTY:
Operating Rod, New, Precision Forged and Machined, Perfection!	229.95 QTY:
Operating Rod Spring Guide, USGI	19.95 QTY:
Operating Rod Spring Guide, NM, Sadlak Industries LLC, Recommended!	39.95 QTY:
Pin Kit, All the Roll Pins Includes: Bolt Stop Pin, Cartridge Clip Guide Pin, Connector Lock Pin, Magazine Catch Pin, Op Rod Guide Pin, and Spindle Valve Pin.	4.95 QTY:
Rear Sight Aperture, Milled, USGI	19.95 QTY:
Rear Sight Aperture, NM, Hooded Choice of .052 or .0595 Aperture Size USGI Contractor, not Chinese!	.052 39.95 QTY: .0595 39.95 QTY:
Rear Sight Base, Milled	29.95 QTY:
Rear Sight Elevation Knob, Milled	49.95 QTY:
Rear Sight Elevation Disk; Renew those worn sight ear serrations! Installation: Thoroughly degrease the disk and the left (elevation) receiver ear. Epoxy the disk with the one-minute serrations to the outside and the half-minute serrations (if present) to the inside. We do not recommend the use of the half-minute side as the outside or adjustment side. The tooth on the rear of the elevation knob is not designed to properly engage the very narrow serrations of the half-minute side.	16.95 QTY:
Rear Sight Spring Cover, New USGI	6.95 QTY:
Rear Sight Windage Knob, USGI	29.95 QTY:
Rear Sight, Complete	134.95 QTY:
Rear Sight Assembly, Flip-up, for Flattop, Yankee Hill	79.95 QTY:
Rear Sight, Folding, Troy Industries, Black or Flat Dark Earth	Black 139.95 QTY: Flat Dark Earth 139.95 QTY:
Fulton Armory semi-auto M14 Receiver, Stripped —marked "U.S. Rifle 7.62 MM M14" Build an M14 from our new semiauto receiver! Unparalleled quality! FFL Required Where an FFL is required, the FFL must be current, legible, signed and standard size as issued by BATF. Please do not minimize or maximize the FFL when submitting it to us! Thanks for your understanding; the BATFE thank you too.	599.95 QTY:
Fulton Armory semi-auto Rear Lug M14 Receiver, Stripped —marked "U.S. Rifle 7.62 MM M14" Build an M14 from our new semiauto receiver! The Fulton Armory Rear Lug is Threaded for the Stabilizing Receiver Bolt! That's the point of the excercise, stabilizing the receiver in the stock. Don't accept inferior alternatives to the Fulton Armory THREADED/ul> rear lug M14 receiver! Unparalleled quality! FFL Required Where an FFL is required, the FFL must be current, legible, signed and standard size as issued by BATF. Please do not minimize or maximize the FFL when submitting it to us! Thanks for your understanding; the BATFE thank you too.	699.95 QTY:
Fulton Armory M14 Receiver, Stripped With Stripped Bolt and 18.5" or 22" Barrel Installed and Headspaced FFL Required Where an FFL is required, the FFL must be current, legible, signed and standard size as issued by BATF. Please do not minimize or maximize the FFL when submitting it to us! Thanks for your understanding; the BATFE thank you too.	w/18.5" Barrel 1049.95 QTY: Add for Chrome Lined Bore & Chamber —55.00 QTY: w/22" Barrel 1049.95 QTY: Add for Chrome Lined Bore & Chamber —55.00 QTY:
Recoil Pad, Rubber *(Buttstock, Buttstock Screws and Sling Swivel, Not Included)*	19.95 QTY:
Safety	24.95 QTY:
Safety Spring	2.95 QTY:
Selector Switch, non-functioning replica, steel, Parkerized, rotates! Attaches to a wood stock with a pin and wood screws. 1/16" and 7/64" drills required for installation. Be sure to "chase" the mounting holes in the switch before proceeding. Click Here for detailed instructions (4.8 MB PDF)	49.95 QTY:
Spindle Valve, Stainless, USGI	9.95 QTY:
Spindle Valve Pin	1.00 QTY:
Spindle Valve Spring, Stainless, USGI	2.95 QTY:
Spring Kit Includes: Bolt Stop Spring, Ejector and Spring, Extractor Spring and Plunger, Hammer Spring, Magazine Catch Spring, Op Rod Spring, Safety Spring, and Spindle Valve Spring-Stainless Steel.	34.95 QTY:
Stabilizer Assembly, M14E2, Milled US, not Chinese!	59.95 QTY:
Stock Ferrule	14.95 QTY:
Stock Ferrule, National Match	Not Available at this time, sorry!
Stock Liner w/Screws Screws Only	19.95 QTY: Stock Liner Screw Only, Each 5.95 QTY:
Stock Liner Screw Tool —Rifle not included!	14.95 QTY:
Stock, GI, Birch, Excellent Condition —with liner, front swivel, ferrule, buttplate assembly, rear sling swivel and upper & lower screws	149.95 QTY:
Stock, GI Contour New Walnut, with or without Selector Cut, No Metal Our Exclusive! GI Contour Stock Front, Compare to Medium Weight Stock, Rear	149.95 QTY: WITHOUT Selector Cut 149.95 QTY:
Stock, Standard Weight, New Walnut, No Selector Cut, No Metal	119.95 QTY:
Stock, NM Heavy Weight, New Walnut, No Selector Cut, No Metal	129.95 QTY:
Stock, New, Brown Laminated Birch, No Selector Cut, No Metal	139.95 QTY:
Stock, NM, Heavy, New, Brown Laminated Birch, No Selector Cut, No Metal	159.95 QTY:
Stock, NM, McMillan M1A Synthetic, Black, Woodland or Desert No Selector Cut, No Metal	499.95 QTY: Woodland 499.95 QTY: Desert 499.95 QTY:
Stock, NM, McMillan M2A Synthetic, Black, Woodland or Desert No Selector Cut, No Metal	749.95 QTY: Woodland 749.95 QTY:9 Desert 749.95 QTY:9
Stock, M3A, McMillan Synthetic Black, Woodland or Desert No Selector Cut, No Metal Includes Ambidextrous adjustable comb riser, adjustable butt stock spacer system for custom length of pull, fully finished, sling swivel studs installed front & rear This stock MUST be glass bedded.	749.95 QTY: Woodland 749.95 QTY: Desert 749.95 QTY:
Stock, Sage EBR/Mark 14 Tactical Stock/Accurizing System Not just accessory flexibility, an Instant Bedding Job! *This is the* stock for your scoped M14-type rifle! “Awesome!”** —Tony Shown with Optional Cartridge Clip Guide Scope Mount Base Compare to other stocks that cost more, and then require costly bedding! The Sage Tactical Stock/Accuracy System offers: Instant bedding! Upper Swan/Weaver (Picatinny) rail Top rear sling swivel Collapsible buttstock Adjustable buttplate Left and right side and bottom rails Front sling adaptor Forward hand cover (requires lower rail) Optional Cartidge clip guide scope mount rail Note that the Sage Tactical/Accuracy System will fit Springfield, Inc. M1A rifles, including the M1A Bush and M1A SOCOM 16 &SOCOM II, when fitted with S, Inc.'s standard barrels. The Sage Tactical/Accuracy System will fit USGI-contour standard barrels. No other weight and no heavy weight barrels will fit. The Sage Tactical/Accuracy System will fit USGI receivers, Fulton Armory M14 Receivers, Springfield, Inc. M1A receivers, Armscorp M14 receivers, Polytech/Norinco M14SA receivers, and all other quality M14-type receivers. Installation only requires removal of the rifle's stock operating rod guide, replacing it with the Sage op rod guide.	Sage EBR/ Mark 14 Stock System w/All Stock Accessories (not including clip guide scope mount) 809.95 Add for Clip Guide Scope Mount Base —$59.95 Add for ARMS QD Bipod Mount —$109.95 Add for Harris Bipod —$89.95
Sage CQB CAR Tactical Stock/Accurizing System Not just accessory flexibility, an Instant Bedding Job! *This is the* stock for your scoped M14-type rifle! “Awesome!”** —Tony Compare to other stocks that cost more, and then require costly bedding! The Sage Tactical Stock/Accuracy System offers: Instant bedding! Accepts any AR-15/M16-type Pistol Grip and CAR Buttstock Six-Position or Fixed CAR Buttstock and Liberator Pistol Grip included Upper Swan/Weaver (Picatinny) rail Top rear sling swivel Collapsible buttstock Left and right side and bottom rails Front sling adaptor Forward hand cover (requires lower rail) Optional Cartidge clip guide scope mount rail Note that the Sage Tactical/Accuracy System will fit Springfield, Inc. M1A rifles, including the M1A Bush and M1A SOCOM 16 & SOCOM II, when fitted with S, Inc.'s standard barrels. The Sage Tactical/Accuracy System will fit USGI-contour standard barrels. No medium weight and no heavy weight barrels will fit. The Sage Tactical/Accuracy System will fit USGI receivers, Fulton Armory M14 Receivers, Springfield, Inc. M1A receivers, Armscorp M14 receivers, Polytech/Norinco M14SA receivers, and all other quality M14-type receivers. vInstallation only requires removal of the rifle's stock operating rod guide, replacing it with the Sage op rod guide.	Sage CQB CAR/ Stock System w/5-Pos CAR Buttstock or Fixed Buttstock w/All Stock Accessories (not including clip guide scope mount) 799.95 Add for Clip Guide Scope Mount Base —$59.95 Add for ARMS QD Bipod Mount —$109.95 Add for Harris Bipod —$89.95
Sage CA-Mandatory Tactical Stock/Accurizing System Not just accessory flexibility, an Instant Bedding Job! *This is the* stock for your scoped M14-type rifle! “Awesome!”** —Tony Compare to other stocks that cost more, and then require costly bedding! The Sage Tactical Stock/Accuracy System offers: Instant bedding! Fixed Fiberglass Buttstock included Upper Swan/Weaver (Picatinny) rail Top rear sling swivel Left and right side and bottom rails Front sling adaptor Forward hand cover (requires lower rail) Optional Cartidge clip guide scope mount rail Note that the Sage Tactical/Accuracy System will fit Springfield, Inc. M1A rifles, including the M1A Bush and M1A SOCOM 16 & SOCOM II, when fitted with S, Inc.'s standard barrels. The Sage Tactical/Accuracy System will fit USGI-contour standard barrels. No medium weight and no heavy weight barrels will fit. The Sage Tactical/Accuracy System will fit USGI receivers, Fulton Armory M14 Receivers, Springfield, Inc. M1A receivers, Armscorp M14 receivers, Polytech/Norinco M14SA receivers, and all other quality M14-type receivers. Installation only requires removal of the rifle's stock operating rod guide, replacing it with the Sage op rod guide.	Sage CA-Mandatory/ Stock System with Fixed Buttstock w/All Stock Accessories (not including clip guide scope mount) 749.95 Add for Clip Guide Scope Mount Base —$59.95 Add for ARMS QD Bipod Mount —$109.95 Add for Harris Bipod —$89.95

Fulton Armory M14 SOCOM Stock System Chassis Only Shown in Flat Dark Earth
Fulton Armory SOCOM Stock System Chassis Only —Black or Flat Dark Earth —just add your own AR-15 buffer tube, end plate, buffer tube nut, and pistol grip. (Note: Expect the FDE color to vary due to differences in anodizing; Tan Furniture will be compatible, but may not be an exact match in all cases) Includes: Troy MCS Modular Chassis System Stock Chassis in Black or Flat Dark Earth *Accepts any* M4/M16 butt stock and pistol grip** - Limitess choices from A1 furniture to the Magpul PRS and more Full length top rail - No need to purchase costly scope mounts. Easily and properly mounts any optics, including ACOGs Rails all around - Great for lights, lasers, even bipods Rails all around - Great for lights, lasers, even bipods Field strips via standard M4/M16 rear pushpin - No tools needed for field strip, optics remain undisturbed Outward M4/M16 appearance - Not easily identified as high priority target Butt Stock in-line with muzzle - Significant reduction of felt recoil and muzzle rise Utilizes standard M14 op rod guide - No need for proprietary components 49" of top, bottom side rails - Accepts all M1913 rail accessories including M203 Proprietary mechanical bedding adjustments - Eliminates the need for fiberglass bedding User Installable with no special tools - Can be completed in 10 minutes Aluminum Chassis with proprietary features - Significantly enhances accuracy Troy proprietary designed system - accepts all diameters of M-14 barrels with no mods Share or Install Any STANAG 1913 Swan/Weaver (Picatinny) Rail Accessory to the Top, Side and/or Bottom Stock Chassis Rails! Options Include: Fulton Armory Flip Up Front and/or Rear Sights ARMS #40L Flip Up Rear Sight - allows lower mounting, miniaturized windage knob with .75 MOA adjustment and a very new and unique dual aperture Troy Flip Up Front and/or Rear Sights Heavy-Duty Swivel(s) for Rail SOCOM System Installation FREE with Stock and Complete Technical Inspection purchases!	Fulton Armory SOCOM Stock System Chassis Only —Black or Flat Dark Earth —just add your own AR-15 buffer tube, end plate, buffer tube nut, and pistol grip. 699.95 Select your Color: FRONT SIGHT OPTIONS Select your Front Sight: REAR SIGHT OPTIONS Select your Rear Sight: POPULAR OPTIONS Add Sling Swivel for Rail—20.00 Add Harris Bipod w/ARMS QD Rail Mount—200.00
Fulton Armory M14 SOCOM Close Quarter Battle (CQB) Stock System Shown in Black with optional Command Arms Ambi Adjustable Cheek Piece
Fulton Armory SOCOM Close Quarter Battle (CQB) Stock System —Black or Flat Dark Earth —includes Command Arms CBST Collapsible Stock (ambidextrous) and Magpul MIAD Pistol Grip System in black or tan (Note: Expect the FDE color to vary due to differences in anodizing; Tan Furniture will be compatible, but may not be an exact match in all cases) —Expertly Assembled and Ready for your rifle installation! Includes: Troy MCS Modular Chassis System Stock Chassis - in Black or Flat Dark Earth Command Arms CBST Collapsible Butt Stock with Buffer Tube - (Black with Black chassis, Tan with FDE chasssis) —Optional Magapul CTR Butt Stock Magpul MIAD Pistol Grip System (ambidextrous) - w/customizable front and rear grip panels for a perfect fit to your hand; includes storage core for batteries (Black with Black chassis, Tan with FDE chasssis) and Pistol Grip Screw & Washer Full length top rail - No need to purchase scope mounts. Easily and properly mounts any optics, including ACOGs Rails all around - Great for lights, lasers, even bipods Rails all around - Great for lights, lasers, even bipods Field strips via standard M4/M16 rear pushpin - No tools needed for field strip, optics remain undisturbed Outward M4/M16 appearance - Not easily identified as high priority target Butt Stock in-line with muzzle - Significant reduction of felt recoil and muzzle rise Utilizes standard M14 op rod guide - No need for proprietary components 49" of top, bottom side rails - Accepts all M1913 rail accessories including M203 Proprietary mechanical bedding adjustments - Eliminates the need for fiberglass bedding User Installable with no special tools - Can be completed in 10 minutes Aluminum Chassis with proprietary features - Significantly enhances accuracy Troy proprietary designed system - accepts all diameters of M-14 barrels with no mods Share or Install Any STANAG 1913 Swan/Weaver (Picatinny) Rail Accessory to the Top, Side and/or Bottom Stock Chassis Rails! Stock Weight: 5.1 lbs (only 2.05 lbs more than a GI stock and handguards) Rifle Weight with 18.5" Barrel: 10.65 lbs Options Include: Fulton Armory Flip Up Front and/or Rear Sights ARMS #40L Flip Up Rear Sight - allows lower mounting, miniaturized windage knob with .75 MOA adjustment and a very new and unique dual aperture Troy Flip Up Front and/or Rear Sights Heavy-Duty Sling Swivel(s) for Rail Command Arms Ambi Adjustable Cheek Piece for CBST Ambi Collapsible Butt Stock - allows proper cheek weld with optical sights SOCOM System Installation FREE with Stock and Complete Technical Inspection purchases!	Fulton Armory SOCOM CQB Stock System —Black or Flat Dark Earth with Command Arms CBST ambi Collapsible Stock and Magpul ambi MIAD Customizable Pistol Grip w/storage 859.95 Select your Color: Select your Stock: FRONT SIGHT OPTIONS Select your Front Sight: REAR SIGHT OPTIONS Select your Rear Sight: POPULAR OPTIONS Add Command Arms Ambi Adjustable Cheek Piece—30.00 Add Sling Swivel for Rail—20.00 Add Harris Bipod w/ARMS QD Rail Mount—200.00 Add Magpul Grip Insert for 2xAA or AAA Batteries—18.00 Add Magpul Grip Insert for 2xCR123 Batteries—18.00
Fulton Armory M14 SOCOM SemiAuto Sniper System (SASS) Stock System Shown in Flat Dark Earth
Fulton Armory SOCOM SemiAuto Sniper System (SASS) Stock System —Black or Flat Dark Earth —includes Magpul PRS Fully Adjustable Stock and Magpul MIAD Pistol Grip System in black or tan (Note: Expect the FDE color to vary due to differences in anodizing; Tan Furniture will be compatible, but may not be an exact match in all cases) —Expertly Assembled and Ready for your rifle installation! Includes: Troy MCS Modular Chassis System Stock Chassis - in Black or Flat Dark Earth Magpul PRS Fully Adjustable Butt Stock with Buffer Tube - (Black with Black chassis, Tan with FDE chasssis) Magpul MIAD Pistol Grip System (ambidextrous) - w/customizable front and rear grip panels for a perfect fit to your hand; includes storage core for batteries (Black with Black chassis, Tan with FDE chasssis) and Pistol Grip Screw & Washer Full length top rail - No need to purchase scope mounts. Easily and properly mounts any optics, including ACOGs Rails all around - Great for lights, lasers, even bipods Rails all around - Great for lights, lasers, even bipods Field strips via standard M4/M16 rear pushpin - No tools needed for field strip, optics remain undisturbed Outward M4/M16 appearance - Not easily identified as high priority target Butt Stock in-line with muzzle - Significant reduction of felt recoil and muzzle rise Utilizes standard M14 op rod guide - No need for proprietary components 49" of top, bottom side rails - Accepts all M1913 rail accessories including M203 Proprietary mechanical bedding adjustments - Eliminates the need for fiberglass bedding User Installable with no special tools - Can be completed in 10 minutes Aluminum Chassis with proprietary features - Significantly enhances accuracy Troy proprietary designed system - accepts all diameters of M-14 barrels with no mods Share or Install Any STANAG 1913 Swan/Weaver (Picatinny) Rail Accessory to the Top, Side and/or Bottom Stock Chassis Rails! Stock Weight: 5.85 lbs (only 2.8 lbs more than a GI stock and handguards) Rifle Weight with 18.5" Barrel: 11.45 lbs Options Include: Fulton Armory Flip Up Front and/or Rear Sights ARMS #40L Flip Up Rear Sight - allows lower mounting, miniaturized windage knob with .75 MOA adjustment and a very new and unique dual aperture Troy Flip Up Front and/or Rear Sights Heavy-Duty Sling Swivel(s) for Rail SOCOM System Installation FREE with Stock and Complete Technical Inspection purchases!	Fulton Armory SOCOM SASS Stock System —Black or Flat Dark Earth with Magpul PRS Adjustable Stock and Magpul ambi MIAD Customizable Pistol Grip w/storage 1004.95 Select your Color: FRONT SIGHT OPTIONS Select your Front Sight: REAR SIGHT OPTIONS Select your Rear Sight: POPULAR OPTIONS Add Sling Swivel for Rail—20.00 Add Harris Bipod w/ARMS QD Rail Mount—200.00 Add Magpul Grip Insert for 2xAA or AAA Batteries—18.00 Add Magpul Grip Insert for 2xCR123 Batteries—18.00
Fulton Armory M14 SOCOM Universal Battle Rifle (UBR) Stock System
Fulton Armory SOCOM Universal Battle Rifle (UBR) Stock System —Black or Flat Dark Earth —includes Magpul UBR Stock and Magpul MIAD Pistol Grip in black or tan (Note: Expect the FDE color to vary due to differences in anodizing; Tan Furniture will be compatible, but may not be an exact match in all cases) —Expertly Assembled and Ready for your rifle installation! Includes: Troy MCS Modular Chassis System Stock Chassis - in Black or Flat Dark Earth Magpul UBR Stock Assembly - Black with Black chassis, Tan with FDE chasssis Magpul MIAD Pistol Grip - Black with Black chassis, Tan with FDE chasssis, and Pistol Grip Screw & Washer Full length top rail - No need to purchase scope mounts. Easily and properly mounts any optics, including ACOGs Rails all around - Great for lights, lasers, even bipods Rails all around - Great for lights, lasers, even bipods Field strips via standard M4/M16 rear pushpin - No tools needed for field strip, optics remain undisturbed Outward M4/M16 appearance - Not easily identified as high priority target Butt Stock in-line with muzzle - Significant reduction of felt recoil and muzzle rise Utilizes standard M14 op rod guide - No need for proprietary components 49" of top, bottom side rails - Accepts all M1913 rail accessories including M203 Proprietary mechanical bedding adjustments - Eliminates the need for fiberglass bedding User Installable with no special tools - Can be completed in 10 minutes Aluminum Chassis with proprietary features - Significantly enhances accuracy Troy proprietary designed system - accepts all diameters of M-14 barrels with no mods Share or Install Any STANAG 1913 Swan/Weaver (Picatinny) Rail Accessory to the Top, Side and/or Bottom Stock Chassis Rails! Stock Weight: 5 lbs (only 1.95 lbs more than a GI stock and handguards) Rifle Weight with 22" Medium Weight Barrel: 12 lbs Options Include: Fulton Armory Flip Up Front and/or Rear Sights ARMS #40L Flip Up Rear Sight - allows lower mounting, miniaturized windage knob with .75 MOA adjustment and a very new and unique dual aperture Troy Flip Up Front and/or Rear Sights Troy Flip Up Front and/or Rear Sights Heavy-Duty Sling Swivel(s) for Rail SOCOM System Installation FREE with Stock and Complete Technical Inspection purchases!	Fulton Armory SOCOM DMR Stock System —Black or Flat Dark Earth with A2 Buttstock and Pistol Grip 1014.95 Select your Color: FRONT SIGHT OPTIONS Select your Front Sight: REAR SIGHT OPTIONS Select your Rear Sight: POPULAR OPTIONS Add Sling Swivel for Rail—20.00 Add CVT Adjustable Cheek Piece—75.00 Add Harris Bipod w/ARMS QD Rail Mount—200.00
Trigger & Sear Assembly	19.95 QTY:
Trigger Pin	3.95 QTY:
Trigger Group, All USGI, Complete Completely assembled —Add 50.00 for NM Modification	N/A Add for NM Trigger Modification —N/A
Trigger Guard, GI	24.95 QTY:
Trigger Housing, USGI, Forged, Stripped, w/Mag Catch, Pin & Spring, Installed	199.95 QTY:
Trigger, Winter	14.95 QTY:

ACCESSORIES, TOOLS & GAUGES

Adjustable Comb Piece, f/Scoped Rifles (Specify Black or Brown); includes low, medium and high inserts as shown.
Adopted by the State Police of IL, LA, MA, MO, NJ, NY & VA!

59.95
Black

59.95
Brown

Bayonet, M6, Original, Excellent, USGI.
See M8A1 Scabbard for this bayonet below.

64.95

Bayonet Scabbard, M8A1, 1960's Production, Original, New, USGI
—Save on Two, plus get the original packing box (scabbards are packed in pairs),

32.95 Two for 59.95

Harris Bipod ``````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
Bipod, Harris, 1A2-L
Lightweight!
Mount to your M14 or M1A Stock, using the following options:

Mount to Accessory Rail for M14 Stock with ARMS QD Bipod Adaptor for Rail (Recommended),
or Aluminum or Polymer Bolt-On Adaptor for Rail or
Glass-bed into your stock either the Harris 2A or Harris 2R Bipod Adaptors (below)

89.95

Harris Bipod

Bipod or Accessory Rail for M14 or M1A Stocks
Replaces standard-issue front sling swivel on M14 or M1A stock.
Provides 3 1/4" long MIL-STD-1913 rail for attachment of accessories.
Freely-roatating 1 5/8" sling loop.
Milled channel allows residual gas to bleed off from gas vent hole.
Use with ARMS QD Bipod Adaptor for Rail (Recommended),
or Aluminum or Synthetic Bolt-On Adaptor for Rail.

59.95

ARMS QD Bipod Mount

ARMS QD Bipod Mount, for Rail

Bipod Not Included

To install, disassemble (left),
attach mounting block to aperture in bipod, reassemble (right).

109.95

Bipod Mount, for Rail, Synthetic
Bipod Not Included

29.95

Bipod Mounted

Bipod Mount, for Rail, Aluminum
Bipod Not Included

39.95

Harris 2R bipod adaptor for M14 & M1A
Bipod Adaptor, Harris 2A, for Harris Bipod

You must inlet this adaptor into the forend. It should mount ahead of the military swivel, so that the bipod will not interfere with a sling.

Instructions from Harris Engineering: "The fore-end should be at least 3/8" thick at the point of installation. A 5/l6" drill is used after the pilot hole is drilled and the shank turned down. The included washer is used under the stud. Inletting under flange may be necessary to clear gas tubes or magazines. Epoxy cement should be used under flange for better contact."

Click Here for more details on mounting a Harris Bipod to an M14 stock with the 2A Adaptor.

12.95

Harris 2R bipod adaptor for M14 & M1A
Bipod Adaptor, Harris 2R, for Harris Bipod

You must inlet this adaptor into the forend. We recommend glassing the plate in place. It should mount ahead of the military swivel, so that the bipod will not interfere with a sling.

Instructions from Harris Engineering: "The fore-end should be at least 3/8" thick at the point of installation. A 5/l6" drill is used after the pilot hole is drilled and the shank turned down. The included washer is used under the stud. Inletting under flange may be necessary to clear gas tubes or magazines. Epoxy cement should be used under flange for better contact."

Click Here for more details on mounting a Harris Bipod to an M14 stock with the 2R Adaptor.

12.95

Blank Firing Adaptor, New GI, w/Shell Deflector
M14 Blank Firing Adaptor and Case Deflector

29.95

Bolt Assembly-Disassembly Tool
GI Design
Bolt Disassembly-Disassembly Tool

69.95

Bolt Roller Greaser

8.95

Bolt Stop, Extended, Smith Enterprises

69.95

Bore Brush

1.95

Case, Rifle, USGI-type
--M14 shown not included!

M14, M1A and Garand Length
24.95

Case, Rifle, Fleece Lined, USGI-type
--Rifle shown not included!

M14, M1A and Garand Length
39.95

Chamber Brush, Ratchet Type, New

6.95

Cleaning Patches, Tetra ProSmith
100% Cotton Flannel, extremely durable, soft and absorbent. Excellent for removing firing residue. Great for polishing and buffing. Designed to work with all Tetra Professional Gun Care lubricants and cleaning solvents.
--300

8.49

Cleaning Kit, Complete, for Butt Stock

27.95

Cleaning Kit, Complete, for Butt Stock, w/Rubberized Canvas Pouch

29.95

Cleaning Rod, Tetra ProShot 1 Piece Nylon Coated, 29"

25.95

Cleaning Rod Guide, Dewey M14/M1A

9.95

M14 Rifle Combination Tool
Combination Tool, M14

14.95

Combination Tool w/Chamber Brush, M3A1

M1 Rifle Combination Tool, M3 with Patch Holder

24.95

Combination Tool, Mk 14, for US Rifle, 7.62MM, Mk 14 Mod 0
and Sage Stock Chassis Systems

M1 Rifle Combination Tool, M3 with Patch Holder

24.95

Compensator, Smith, CA-Mandatory, replaces Flash Suppressor

Choice of Classic Style with Front Sight Base (no lug), or

Direct Connect Style (no Front Sight Base)
—for applications where front sight is mounted on the gas cylinder lock (e.g, Mk 14), or no front sight is needed (e.g., SOMPOD Systems)

CA-Mandatory
Compensator
w/o Bayo Lug
149.95

CA-Mandatory
Compensator, Smith
Direct Connect
99.95

Fulton Armory Dry Fire Device
Click HERE for all the details!

12.95

Extended Bolt Stop, Smith Enterprise

69.95

Firing Pin Protrusion Gauge, New Original USGI
Rare, Limited Supply!

39.95

Vortex® Flash Suppressor,
Choice of Direct Connect

—for rifles with Gas-Cylinder-Lock-Mounted Front Sights, or

Classic Design, with Front Sight Base

Not for S, Inc. "SOCOM" models with integral gas cylinder lock/muzzle device.

Vortex® Direct Connect
99.95

Vortex® Classic
149.95

M14 Flash Suppressor Pliers!

24.95

NEW! M14 Flash Suppressor Alignment Gauge! Made to USGI print by USGI contractor!

The same gauge we use to confirm the alignment of the flash suppressor on your rifle!

69.95

Front Sight Night Sight

.580" for 22" barrel
62.95

.675" for 18" barrel
62.95

Front Sight Protector

4.95

Front Vertical Grip, Twist Lock QD
For SOCOM, SOCOM and Mk 14

24.95

M14 Rifle Gas Cylinder Wrench
Gas Cylinder Wrench, Budget

9.95

Gas Cylinder Wrench
Aluminum, 1/2" Thick, Powder-Coat OD Green, Finest, Recommended, Sadlak Industries LLC

24.95

Gas System Cleanout Tool
Finest, Recommended, Saklak Industries LLC
Cleans out harmful deposits in the gas piston body and stem as well as the gas plug recess.

29.95

Handguard, Rail, Fulton Armory Super Scout
—The Foundation of the Fulton Armory M14 Super Scout Rifle!

Now you can get the fastest target acquisition possible on this proven battle rifle by using a modern sight system. Use the iron sights or mount an Aimpoint^®, pistol or scout scope, ACOG, Holo-sight, red dot, etc. This rugged aluminum and stainless steel unit bolts on in minutes with NO modifications required. Will fit all standard weight US made mil-spec barrels and Springfield, Inc. MIA SOCOM and SOCOM II barrels. The optional Fulton Armory Super Scout Accessory Rail allows quick and secure mounting of lighting devices or laser sights, including the 45⁰ offset so popular with three-gun shooters for their CQB optics.

The Super Scout Handguard Rail affords much greater heat dissipation compared to those shorty "scout mounts" you may have seen. Nor more "cooked" scopes!

Accessory/Light Rail for Super Scout Handguard

Super Scout
Rail Handguard
299.95

Accessory/Light
Mount for
Super Scout Handguard
19.95

Handguard Clip Pliers

29.95

Headspace Gauge for Cartridge, .308 Winchester, a must for reloaders!

59.95

Headspace Gauge Set, for Chamber, .308 Winchester GO, NO-GO & FIELD, for barrel chamber headspace.

64.95

Magazine, 5 Round, Flush

34.95

Magazine, 10 Round

34.95

Magazine, 20 Round, New, Mil-Spec

39.95

Twenty Round Magazine
Magazine, 20 Round, Used, Serviceable, Pre-Sept 1994 for you in "ban" states, e.g., NY!

74.95

Twenty Round Magazine
Magazine, 20 Round, New, Pre-Sept 1994 for you in "ban" states, e.g., NY!

89.95

Muzzle Gauges Muzzle Gauge Demonstration

Muzzle Wear (Erosion) Gauge

Muzzle gauges on left, demonstration right.

Toss that dummy cartridge, now you can measure muzzle condition precisely!

Muzzle Gauge is Calibrated in thousandths of an inch
Instructions:
Carefully, so as not to damage the barrel's rifling or the gauge, insert the the gauge into the muzzle as shown. Read the gauge directly from the side. Observe where the muzzle "falls" on the gauge.

0.0 indicates a .300” diameter bore, that is, .30 caliber, new, perfect.

0.5 is like new, .3005 caliber. Proper re-crowning will perfect the crown.

1.0 is excellent for a used barrel (.301 cal.) Re-crowning should make it like new.

1.5 is good (.3015 cal.). Proper re-crowning should make it excellent.

2.0 is fair (.302 cal.). Proper re-crowning should make it serviceable.

2.5 is poor (.3025 cal.). Proper re-crowning might make it serviceable.

3.0 or more is a "bald tire" and is now a British .303 caliber barrel. Replace barrel

34.95

Muzzle Brake (Compensator), Smith, CA-Mandatory, replaces Flash Suppressor

CA-Mandatory
Compensator
w/o Bayo Lug
149.95

CA-Mandatory
Compensator, Smith
Direct Connect
99.95

Front Sight Night Sight

.580" for 22" barrel
62.95

.675" for 18.5" barrel
62.95

Pistol Grip System, Magpul MAID, Interchangable Front and Back Straps, Black or Flat Dark Earth
Make the grip fit your hand, not vice versa!

Magpul Pistol Grip System Replacement Insert, Black or Flat Dark Earth
—for two (2) AAA or AA batteries; store spares for your light or laser or optic...

Magpul Pistol Grip System Replacement Insert, Black or Flat Dark Earth
—for two (2) CR123 batteries; store spares for your EOTech or Aimpoint or light or...

MAID Grip
Black
39.95

AA Insert
Black
17.95 CR-123 Insert
Black
17.95

MAID Grip
FDE
39.95

AA Insert
FDE
17.95 CR-123 Insert
FDE
17.95

Poster, M14 Rifle, Exploded View
16" x 20"
Signed and Numbered, Suitable for Framing!

14.95

QTY:

Stock Rail

Rail, Bipod or Accessory, for M14 or M1A Stocks

Replaces standard-issue front sling swivel on M14 or M1A^® stock.
Provides 3 1/4" long MIL-STD-1913 rail for attachment of accessories.
Freely-roatating 1 5/8" sling loop.
Milled channel allows residual gas to bleed off from gas vent hole.
Use with ARMS QD Bipod Adaptor for Rail (Recommended),
or Aluminum or Synthetic Bolt-On Adaptor for Rail.

59.95

Rear Sight Protector

4.95

Buffertech Recoil Buffer for M14 and M1A

Recoil Buffer by Buffer Technologies

14.95

(Buttstock, Buttstock Screws and Sling Swivel, Not Included)

Recoil Pad, Rubber

19.95

Rifle Case, USGI-type
--M14 shown not included!

M14, M1A and Garand Length
24.95 Carbine Length
24.95

Rifle Case, Fleece Lined, USGI-type
--Rifle shown not included!

Rifle Length
39.95 Carbine Length
39.95

Ruptured Case Extractor, .308/7.62mm

16.95

Safety Flag—required at most ranges and for competition!

1.95

Cartridge Clip Guide
Scope Mount Base
—Aligns with Sage Stock Forend Rail. Is not designed to align with any other rail.

59.95

Scope Mount, Aluminum
Two-point mounting design!

69.95

Scope Mount, Fulton Armory U.S. DMR, Picatinny Rail, Three-Point Attachment, The Best!

Click Here for Ring Height Calculator

8620 Steel (same heat expansion as the receiver)
Smoothly sculpted with nothing to snag
Three point mounting
Compensates for differing receiver ring heights

Uncompromising Fulton Armory quality!

224.95

Spares Kit for Fulton Armory Scope Mount, Includes Side Mount Bolt, Side Mounting Cam, Dovetail Cartrdige Clip Guide & Screw

49.95

Side Mount Bolt for Fulton Armory Scope Mount

19.95

Side Mount Cam for Fulton Armory Scope Mount

24.95

ARMS Scope Mount
Scope Mount, ARMS 18, USGI
Click Here for Ring Height Calculator

8620 Steel (same heat expansion as the receiver)
Smoothly sculpted with nothing to snag
Three point mounting
Compensates for differing receiver ring heights
Uncompromising ARMS quality!

Note: If you have an S, Inc. M1As, please consider the Fulton Armory scope mount above for a more predictable fit.

179.95

A.R.M.S. QD Throw Lever Base
ARMS 18 with QD Throw Lever Base
Top, QD Throw Lever Base;
Lower left, ARMS 18 Scope Mount w/o QD Throw Lever Base; Lower right, w/QD Throw Lever Base

Scope Mount, ARMS QD Throw Lever Base
Provides multiple Swan/Weaver mounting positions and the ARMS patented return-to-zero QD levers!
Aluminum rail, Steel locking mechanisms
Recommended for demanding conditions and/or heavy optics.

159.95

A.R.M.S. QD Throw Lever Base

Scope Mount, ARMS 19-ACOG QD Throw Lever ACOG Base
Provides ACOG Mount with the ARMS patented return-to-zero QD levers!
Aluminum rail, Steel locking mechanisms
Recommended for demanding conditions.

159.95

Pushbutton QD Sling Swivel, Heavy Duty, 1¾"

Scope Rings, ARMS, Q.D., 30mm, Low, Medium or High
Click Here for Ring Height Calculator

Low
119.95

QTY:

Medium
119.95

QTY:

High
119.95

QTY:

Scope Ring Reducers, ARMS 30mm to 1 Inch

39.95

Selector Switch, non-functioning replica, steel, Parkerized, rotates!

Attaches to a wood stock with a pin and wood screws. 1/16" and 7/64" drills required for installation. Be sure to "chase" the mounting holes in the switch before proceeding.

Click Here for detailed instructions (4.8 MB PDF)

49.95

Shipping Box, Large, for M14 & M1A Rifles
Heavy, "Double Pack" overlapping "trays"; high density waffle foam "sandwich."
Doesn't scream "RIFLE INSIDE! STEAL ME!"
Use and reuse many, many times. It's what we use for your custom rifle and upper!

Delivered
35.00

Sling, Silent, Long, 72"
(requires front sling swivel)

14.95

Sling, Leather, M1907, GI-Type, Steel Hardware, Tan or Black
CMP/NRA Service Rifle Legal!

Tan
34.95

Black
34.95

Sling, Leather, M1907, GI-Type, Brass Hardware, Tan
CMP/NRA Service Rifle Legal!

29.95

Sling, Leather, NM, 54" Front, Turner Saddlery, CMP/NRA Service Rifle Legal!

Black or Tan

Tan
59.95

Black
59.95

Turner National Match All Weather Sling

Sling, Biothane, NM, 54" Front, Turner Saddlery All Weather Sling (AWS)
Black or Brown
CMP/NRA Service Rifle Legal!

Black
59.95 Brown
59.95

Sling, Web, New Cotton, Black or Olive Drab

Black
14.95
OD
14.95

ARMS QD Bipod Mount

Mk 14 Sling
As issued with the Mk 14 Mod 0!

69.95

Stabilizer Assembly, M14E2, Milled (Rifle not included)
Installs over flashhider, clamps to bayonet lug
G.I. Issue for the M14E2
US, not Chinese!

59.95

Stock, M3A, McMillan Synthetic
Woodland or Desert
No Selector Cut, No Metal

Includes Ambidextrous adjustable comb riser, adjustable butt stock spacer system for custom length of pull, fully finished, sling swivel studs install front & rear

This stock MUST be glass bedded.
McMillan M3A Stock for M14 and M1A

Woodland
699.95

Desert
699.95

Stock Liner Screw Tool
—Rifle not included!

14.95

Stripper Clips, 10-Pack
—See Stripper Clip Guide Below

7.95

Stripper Clip Guide for Magazines
—used to load magazines from stripper clips; not the Clip Guide that's part of the rifle!

4.95

NEW! Tetra^® Gun Cleaning DVD

Step-by-step professional instructions on how to properly clean your rifle, shotgun or handgun with Tetra^® Gun care products.

A detailed DVD outlining:

Innovative tips and techniques
First-hand demonstrations

Tetra® Action Blaster Gun Degreaser, 18 oz. Aerosol, The Best!
"Action Blaster" firearm cleaner/degreaser combines maximum cleaning power with pleasant 'outdoor' scent. Quickly and effectively removes firing residue, dirt, and other fouling using no ozone depleting chemicals or flammable propellants. 18oz. Aerosol Container.

8.49

Tetra® Liquid Blue, 2.7 oz. wide-mouth container, The Best!
The best product for steel touch-up or complete re-blue. Fast-acting liquid gives a non-streaky uniform blue-black finish. New additive package further enriches color and reduces desired color achievement time.

4.99

Tetra Bore Cleaner and Copper Solvent
Tetra® Gun Cleaner and Copper Solvent, 4 oz., The Best!
Concentrated copper, lead, powder, and plastic remover...ALL IN ONE. Formulated to provide quick removal of stubborn foulant deposits from firearm barrels. Unique patent-pending formulation has an additive that offers protection from “Bore Etching” or premature barrel wear associated with the usage of aggressive solvents. Recommended as the first step in Tetra® Gun Lubricant barrel conditioning.

6.99

Tetra Grease
Tetra® Gun Grease, 1 oz., The Very Best for the M14/M1As!
Heavy duty fluoropolymer penetrating white grease. For use on all metal to metal contact surfaces, such as rifle bolts, sears, locking lugs, sight screws, and semi-automatic slide/rails. Apply light coating to metal surface, buff dry for a debris repelling, ‘glass smooth’ surface. Effective operating temperature range from -100° to 750°F+.

4.99

Tetra Spray
Tetra® Gun Lubricant, 4 oz., The Best!
Patented, fluoropolymer penetrating lubricant and bore conditioner. For use on actions, levers, and other moving parts. Effective lubrication from -100° to 750°F+. Apply to inside of the firearm barrel for corrosion protection, reduced fouling (outstanding in black-powder applications!), increased projectile velocity and improved accuracy.

6.99

Tetra Spray
Tetra® Gun Lubricant, 8 oz., The Best!
Fluoropolymer Cleaner and Light Lubricant. Spray on as an all-purpose gun cleaner, lubricant, and preservative. Quick-evaporating solvent removes dirt, combustion residue, and conventional lubrication products, leaving behind a fluoropolymer coating for outstanding corrosion protection and light lubrication. Tetra Gun Spray is also extremely effective as a bore cleaner for black-powder firearms

11.49

Tetra® Handy Lubricant Wipes

Easy, convenient and handy

Provides immediate protection to your valuable and rust prone firearms.

Contains 50 wipes

4.99

Tetra Rust Remover
Tetra® Gun Blue & Rust Remover, 2.7 oz. wide-mouth container, The Best!
The safe, reliable solution that removes rust and old blue easily and quickly without damaging base metal. Removes old metal finishes from modern firearms, muzzleloaders and antiques. Excellent for removing rust from tools, gauges, and precision equipment.

4.99

Tetra® GunStock Finishing Kit
A Natural, Rich Walnut Finish For Any Stock. The complete Gun Stock Finishing Kit brings out the natural beauty in wood stocks.
Kit Contains:

Walnut Stain, 3 oz.

Gun Stock Finish, 3 oz.

Service Cloth

Sandpaper (120, 280 & 400 grit)

Instruction Guide

13.95

Throat Erosion Gauge, .308/7.62-MM, GI Specification and Configuration

79.95

Vertical Grip, Front, Twist Lock QD
For SOCOM, SOCOM and Mk 14

24.95

Winter Trigger

14.95

BOOKS, POSTERS and DVDs:
No refunds on DVDs or books, please, defective media exchanged, of course.

Size: 6 inches by 9 inches
Number of pages: 250
Number of photographs: over 600

The M14 Complete Assembly Guide

-The key to support and maintenance
of your M14/M1A® Rifle-

by Walt Kuleck and Clint McKee

In short, you'll know your M14/M1A® inside and out.

24.95

Classic Military Films on DVD!
No refunds on DVDs or books, please, defective media exchanged, of course.
Scroll down for Combo Specials!

Rifle Marksmanship with the M1 Rifle Part 1 (Reel 2 of M1 Training)

70 min./b&w - "Rifle Marksmanship with the M1 Rifle, Preparatory Training" filmed in the 1940's. This video is in black & white and was produced by the US ARMY as a instructional video on basic marksmanship with the M1. The video is over an hour long and covers every aspect of accurately shooting these famous WWII weapons. This video was digitally transferred from a 16mm film to video. The quality is outstanding!

Click Here for a sample clip (526 KB .wmv file)

19.95

Rifle Marksmanship with the M1 Rifle Part 2 (Reel 3 of M1 Training)

75 min/b&w - "Rifle Marksmanship with the M1 Rifle, Preparatory Training - Elevation and Windage" filmed in the 1940s. This is a continuation of the original M1 Basic Marksmanship series. It focuses on "elevation and windage" and the correct calculations for setting the M1's sights. This video is in black & white and was produced by the US ARMY as a instructional video on advanced marksmanship with the M1. The video is an hour long and covers every aspect of sighting these famous WWII weapons. This video was digitally transferred from a 16mm film to video. The quality is outstanding!

Click Here for a sample clip (539 KB .wmv file)

19.95

The M1 and M2 Carbine

26min/b&w "The M1 Carbine & the M2 Carbine" was filmed in the 1950's in black & white and was produced by the US ARMY as a instructional video on the basic working operation of both the M1 and M2 carbine. It is filled with fascinating instructional scenes of how these rifles work. Using a giant-sized replica, an Army instructor shows all the inner workings of the M1 and M2.

Click Here for a sample clip (388 KB .wmv file)

19.95

US Small Arms Weapons of WWII

40 min/b&w - "The Fundamentals of Small Arms Weapons" filmed in the 1950’s, is an instructional video on the basic working operation of a M1 Garand rifle. The video covers many other types of small arms including the B.A.R., M3, .45 pistol, and .50 caliber machine gun. This is a fascinating instructional video on how a gun really works. Using a giant-sized replica, an Army instructor shows the inner workings.

Click Here for a sample clip (377 KB .wmv file)

19.95

Infantry Weapons of the Vietnam War

22 min/color - "Weapons of the Infantry" filmed in the 1960s was produced by the US Army and Marine Corps as a training film for their soldiers. This instructional video covers the rifles: M-14, the M14-A1 and the M-16A1. Also included are the M-79 grenade launcher, 90 and 106mm recoiless rifles, 50 caliber spotting guns, and 81mm and 4.2 inch mortars. This video is filled with fascinating instructional scenes of how all these famous guns and mortars work.

Click Here for a sample clip (843 KB .wmv file)

19.95

Combo Special: M1 Rifle Marksmanship
Parts 1 AND 2

34.90, save $5.00!

34.90

Combo Special: US Small Arms Weapons of WWII
AND Infantry Weapons of Vietnam

34.90, save $5.00!

34.90

Combo Special: All Five Videos:
M1 Rifle Marksmanship Parts 1 and 2, The M1 and M2 Carbine, Infantry Weapons of WWII AND Infantry Weapons of Vietnam

74.75, save $25.00!

74.75

Poster, M14 Rifle, Exploded View
16" x 20"
Signed and Numbered, Suitable for Framing!

14.95

QTY:

Announcing the Release of an exciting NEW book
—as featured in American Rifleman magazine!

US Infantry Weapons in Combat

Personal Experiences from World War II and Korea

by Mark G. Goodwin with foreword by Scott A. Duff

Click HERE to read excerpts from this book

23.50

The M14 Owner's Guide, by Scott Duff

Finally, a single source owner's manual that answers all your questions about the care and feeding of the M14/M1A Rifle--autographed by the author, Scott Duff!

19.95

M14-M1 Garand Shop Manual, by Jerry Kuhnhausen

Finally available! This definitive work covers all aspects of theory, function, repair, accurizing, assembly-disassembly, etc. Includes drawings and technical specifications. A must-have book!

44.95

Reading the Wind and Coaching Techniques

Sight Alignment, Trigger Control, and 'The Big Lie'

Reading the Wind and Coaching Techniques

A simple system for judging the speed, direction and value of the wind. Learn to read the mirage, wind strategies, effects on the bullet and much more. The coaching techniques will help your own performance and that of others

11.95

Sight Alignment, Trigger Control and the Big Lie

A Powerful packed book that has helped many shooters improve their groups and scores, some by as much as forty or fifty points. This book covers not only the basics of breathing, natural point of aim, sight alignment, sight picture, focus and trigger control exercises. It has sections on Mental conditioning, marking the sights, zeroing, normal come ups, light effects, damage to the crown, care in cleaning, throat erosion and bullet run out. There is also an advanced theory that has been praised by High Masters and Marksmen

11.95

Leather Sling and Shooting Positions

Learn to assemble the leather sling in the same method taught by the Marine Corps Team. Follow a four-step program to shooting positions, the likes of which you have never seen before. As an added bonus, receive a five-step theory that could increase your off-hand three to ten points

11.95

Care, Cleaning and Sportsmanship

The Care and Cleaning of Rifles, with particular attention to the Service Rifles. Tips on Bullet Seating, An interview, Questions & Answers with Boots Obermeyer, Jack Krieger, Charlie Milazzo and Mike Bykowski. Also, Interviews with Seven National Champions as how they clean their bores. An extensive chapter on "Moly Coating." The positive side of Sportsmanship.

11.95

Arms For The Nation (1994) - History of Springfield Armory produced longarms from Flintlock to M14.

Arms for the Nation provides a general history of 174 years of Springfield longarms in one treatise. Springfield Armory was established by Congress in April 1794 and supplied arms for the nation until its closure in April 1968. This book commemorates the bicentennial of the founding of the Armory and describes the longarms developed and produced there.

The introduction provides the reader with an overview of Springfield Armory, its establishment, industrial history, and the National Park Service administered Museum. The remainder of the book defines the eight epochal types of longarms produced by Springfield. A chapter is devoted to the Flintlock Musket, Percussion Musket, Rifle-Musket, Trapdoor Rifle, Krag Rifle, '03 Springfield Rifle, M1 Rifle, and M14 Rifle.
Each chapter describes that particular epochal arm, the various models, their production history, their service record, and significant examples displayed in the Springfield Armory Museum. A chart depicting production quantities, duration of manufacture, length, weight, and caliber is included along with photographs and drawings of each example.

9.95

For Contact Info, Shipping Charges and Terms and Conditions, Click Here

M1A is a registered trademark of Springfield, Inc.

Vortex is a registered trademark of Smith Enterprises