|
|
Barrel, M1 Garand, .30-06, G.I. Contour, Chrome Moly, Krieger
|
|
Part #: FA-G-004
In Stock
|
Krieger Barrels, Inc. manufactures precision single-point cut-rifled barrels, which is the oldest and slowest method of rifling a barrel. The cutter removes approximately .001" at each pass, thus taking several hundred passes to rifle a barrel. This produces near perfect concentricity between groove & bore, a very uniform twist rate, and induces no stress into the steel which later has to be relieved. The barrels are hand lapped after reaming and then again after rifling to finishes under 16 micro-inch in the direction of bullet travel.
Our Krieger barrels are fully finished and chambered by Krieger (not blanks)
The chamber is .010-.020 short and should be properly head spaced by a qualified gunsmith.
* John Garand Match Legal
Specifications
- 24"
- G.I. Contour
- 1-10 twist
- .30-06 short chamber by Krieger
- Krieger selected chrome moly steel
- Manganese phosphate parkerized
- Single-point cut-rifling
*BARRELS, BOLTS, & RECEIVERS MUST BE PROPERLY HEAD SPACED PRIOR TO USE. FAILURE TO DO SO MAY RESULT IN FIREARM DAMAGE, PERSONAL INJURY, OR DEATH* |
|
|