|
WE BUY USGI PARTS!
PLEASE SEND US AN EMAIL DETAILING WHAT YOU HAVE
|
|
SEND YOUR RIFLE INTO FULTON ARMORY
*All Makes & Models*
YOU CAN TRUST OVER 50 YEARS OF EXPERIENCE
We are one of the only shops in the world with specialized experience servicing the 5 Military Gas Guns and we have all the original USGI gauges
(M1 Carbine, M1 Garand, M14 / M1A, AR-15, & .308 AR-DPMS Pattern)
|
|
1. Simply purchase our shipping container below.
2. Securely pack up your rifle with included packing materials & fill out our included service request form.
Click here for acceptable firearms.
3. Ship your firearm to us.
4. Please allow 5 months to be inspected & contacted, after which we'll get payment & the work will be done shortly.
*Small repairs or work for deploying military / match shooters may be done sooner with prior approval.
The current wait time for:
> Enhanced Trigger Mods is 1 week. Please send ONLY your trigger group.
> Just need a barrel? Check out our Express Re-barreling Service
NOTE: In the event that your shipping request is denied by USPS, kindly refer the USPS personnel to the “USPS Publication 52, 432 Mailability, section 432.3 which explains mailability of rifles”. Click here for full USPS 432 Mailability Info.
| Technical Inspection |
$89.95, Plus Return Shipping
|
|
We start with our acclaimed, exclusive, & comprehensive Tech Inspection which includes completely disassembling, inspecting, and military gauging each component. Upon completion of the inspection, we will consult with you regarding our findings, as well as, discuss your goals and expectations for the rifle. Then complete the agreed-upon work, reassemble, lubricate, and functionally test-fire your rifle. The TI is the foundation and ensures the function and safety of your rifle.
|
|
Metal Refinishing
Clean, Degrease, Bead Blast Metal Parts And Parkerize With Manganese Phosphate. (We Do Not Offer Aluminum Re-Finishing).
|
|
All metal parts are deep cleaned, expertly media blasted and re-parkerized in our beautiful manganese phosphate solution. Stainless parts are swapped for black oxide-prepped pieces in equal or better condition. Lubricated with Lucas Oil Extreme Duty CLP.
|
Add $195.00
|
|
|
Barrel Installation
Supply, Fit, Headspace, Polish, Precisely Index & Install one of our proprietary Criterion sourced barrels:
|
| Fulton Armory Supplied Barrel |
$95.00 (+ Barrel Cost)
|
| Customer Supplied Barrel |
Starts at $150.00 |
|
Barrel Modifications
|
| Recrown Muzzle |
Add $45.00 |
| Barrel Refresh (Deep Clean Bore, Polish Chamber and Recrown Muzzle, Reinstalled) |
Add $125.00 |
| Enhanced Trigger Modification |
Add $75.00 |
|
Fulton Armory Stocks and Handguard
Hand-select a US-made American walnut stock and matched handguard set. Then expertly fit, sand, and hand rub w/ boiled linseed oil. Installed with customer supplied stock hardware (Includes Stock and Handguard, No Hardware)
|
| Walnut Stock and Handguard, Hand Finished with Boiled Linseed Oil |
Add $325.00
|
| —Add for Standard Hardware, Installed |
Add $47.00
|
| Supply, Fit, and Install Super Scout Picatinny Rail Handguard |
Add $140.00 |
| Other Service |
| Stock/Handguard Refresh - Light Sand/Deep Clean and Apply BLO (Boiled Linseed Oil) |
Add $75.00 |
New M1 Carbine Build on Your USGI Receiver
|
$300 Credit |
|
|