Proud Partner
WE BUY USGI PARTS!
PLEASE SEND US AN EMAIL DETAILING WHAT YOU HAVE
Follow Us!
|
Dry Fire Device, for M1, M14 & M1A, Fulton Armory
|
Part #: FA-A198-GM
In Stock
|
The Fulton Armory Dry Fire Device is a simple, elegant solution to the challenge of training via dry firing. Dry fire training is mandatory for those interested in improving their marksmanship. Dry fire all day long without breaking position or pushing that pesky Garand follower down! Recock with a quarter-inch pull on the op rod handle!
Once installed, to use the Fulton Armory Dry Firing Device cycle the op rod handle only about a quarter inch (you'll hear the hammer cock). Pull the trigger; you will experience your normal trigger pull, but the hammer will not strike the firing pin! Reset the hammer by cycling the op rod handle only about that quarter inch. You don't have to fully cycle the bolt (and, with the Garand, break position to push the follower out of the way of the bolt!) to cock the hammer and practice dry firing!
The Fulton Armory Dry Fire Device permits safe, easy and convenient dry fire practice without any alteration to your rifle. Installation takes only seconds. The Fulton Armory Dry Fire Device may be left in the rifle for added storage safety, yet removed in seconds to ready the rifle for immediate use.
What do we mean by "seconds"? As many seconds as it takes you to open your M1/M14/M1A's bolt and then close it. That's how quickly the Fulton Armory Dry Fire Device installs and removes, and that's how easy it is.
WHEN DRY FIRING, OBEY ALL SAFETY RULES AND MAKE SURE THE RIFLE IS UNLOADED! POINT THE RIFLE IN A SAFE DIRECTION!
|
|
|